Yamaha 6X4-42102-52-00

Details

What this Yamaha 6X4-42102-52-00 - 60/70 tiller fitting kit does Converts or prepares select Yamaha 60/70 HP outboards for tiller-handle control by adding the OEM mounting/bracket hardware and linkages the engine needs to accept a compatible Yamaha tiller handle assembly. It’s an OEM fit solution designed to maintain correct steering, throttle, and shift geometry at the transom. Compatibility (quick guidance) Intended for specific Yamaha 60/70 HP models (model-year dependent). Always verify by engine model code/PID or serial in Yamaha’s engine schematics before purchase. If your engine is currently set up for remote/helm controls, this kit is used when converting to a tiller configuration (you may also need a compatible tiller handle assembly and harness/stop-switch items – see “Related parts” below). Typical components in a Yamaha tiller fitting kit (Exact contents vary by kit revision and engine family; list below describes common inclusions for this class. Retain the OEM parts list on the product card as the source of truth.) Transom-side/tiller pivot bracket(s) and mounting hardware Shift and throttle link arms with clips/pins Steering friction/stop hardware and fasteners Cable/harness retainers and grommets as applicable Engine-side stop-switch lead provisions (model dependent) OEM fasteners (bolts, nuts, spacers, washers) in the correct grades/finishes Install basics De-rig (if converting): Remove remote control linkages and related brackets per the service manual. Mount brackets: Install the tiller pivot/mount brackets to specified torque; use OEM fastener order and any spacers/bushings provided. Link shift & throttle: Attach link arms to the engine levers at the indexed holes; secure with new clips/cotters. Confirm neutral start and full-throw travel. Fit the tiller handle: Install the compatible Yamaha tiller handle assembly; route wiring/harness and kill-switch lanyard per manual. Set friction & stops: Adjust steering friction and mechanical travel stops to spec. Function checks: Verify start/stop, shift detents, idle to WOT range, and steering sweep without interference. Always follow the Yamaha service manual for your exact model. If you’re unfamiliar with rigging, consult a qualified marine technician. Tools you’ll likely need Metric socket/torque wrench set (observe OEM torque specs) Pliers for clips/cotters; threadlocker where specified Marine anti-seize for stainless fasteners into aluminum Dielectric grease for connectors; cable ties and grommet lube Shop rags and solvent for prep/clean threads Related parts (often paired with this kit) Yamaha tiller handle assembly compatible with your engine family (power/trim switch and start/stop options vary by handle). Engine-side wiring/harness adapters (if your engine requires them for the stop switch/trim). Prop hardware & safety items (cotter pin, nut, thrust washer) if you’re doing a full re-rig. Pricing & Documentation Pricing: Open the product card to view the current price. Documentation: Use Yamaha engine schematics to confirm part numbers, sub-assemblies, and any model-specific notes for your exact PID. FAQs about Yamaha 6X4-42102-52-00 - 60/70 tiller fitting kit What engines does 6X4-42102-52-00 fit? Select Yamaha 60/70 HP models. Confirm by model code/PID in Yamaha schematics for your specific year/variant. What’s the difference between 6X4-42102-52-00 and 6X4-42102-53-00? They are related fitting kits with revision/model-coverage differences. Match your engine by schematic lookup to choose the correct kit. Does this kit include the tiller handle itself? This kit provides the engine-side brackets/linkages needed to accept a compatible Yamaha tiller handle assembly (sold separately). Can I install it myself? Experienced DIYers with rigging background can follow the Yamaha service manual. If unsure, use an ABYC-certified marine technician. What warranty applies? OEM Yamaha parts are covered under Yamaha’s parts warranty terms. See the Returns & Exchanges policy for eligibility and timeframes. Which other parts might be required? Depending on your engine and current setup: tiller handle assembly, harness/adapter leads, stop-switch lanyard, and minor rigging hardware.

Description and specifications supplied by Yamaha Online Parts.